RELAY-6 six-pad wireless launcher - Rev A panel cut files (DXF)
================================================================

Format: DXF R12, millimetres. Origin: lower-left corner of each panel.
Layers: CUT = cut through; ENGRAVE = mark only (NFC target, hazard border,
bend line); NOTE = text, do not cut.

Made by: src/gen_shop.py from src/parts.py in the Model Rocketry project
(launchers/wireless-launcher/), drawn for model-rocketry.fubsypoly.com,
2026-11-18. Edit parts.py and regenerate; never edit a DXF by hand.

Known problems / before cutting:
- Nothing here has been cut or test-fitted yet. The design is on paper.
- Case sizes are estimates: the Apache 3800 lid/base split is taken from the
  Pelican 1450 it copies, and the corner radius and ammo-can sizes are
  guesses. Measure your cases first (build guide Stage 0).
- Holes marked CHECK on the printed sheets (60 mm buttons, USB-C
  extension, Powerpole clip, lever slots, core housing) must be confirmed
  on the real part before cutting.
- Print the matching sheets from launchers-relay6-cut-sheets-drawing.pdf
  at 100 % and check the 100 mm bar before using them as templates.

Files:
- P-1_halo.dxf                   3680 bytes  HALO main panel (P-1), 3 mm black cast acrylic
- P-2_halo_lid.dxf               2702 bytes  HALO lid insert (P-2), 3 mm black acrylic
- P-3_halo_cover.dxf              945 bytes  HALO FIRE flip cover (P-3), 3 mm clear acrylic
- P-3_halo_hinge_blocks.dxf       863 bytes  HALO cover hinge blocks (P-3), 6 mm black acrylic
- P-3_halo_ring.dxf               375 bytes  HALO edge-lit ring (P-3), 6 mm clear cast acrylic
- P-4_flightdeck.dxf             5545 bytes  FLIGHTDECK panel (P-4), 3.18 mm 5052 aluminium or 3 mm acrylic
- P-5_flightdeck_lid.dxf         3246 bytes  FLIGHTDECK lid insert and checklist window (P-5)
- P-6_monolith.dxf               8117 bytes  MONOLITH panel (P-6), two laminated 3 mm black acrylic layers
- P-7_monolith_lid.dxf           6478 bytes  MONOLITH lid insert, twin OLED strip (P-7)
- P-8_padbox_front.dxf           4754 bytes  RELAY-6 pad box front face drill template (P-8)
- P-9_padbox_lid.dxf             1052 bytes  RELAY-6 pad box lid drill template (P-9)
